Efficacy and safety of transjugular intrahepatic portosystemic shunt (TIPS) created using covered stents of different diameters: A systematic review and meta-analysis

PurposeThe purpose of this study was to make a systematic review and meta-analysis to determine the stent diameter (8 mm vs. 10 mm) that conveys better safety and clinical efficacy for transjugular intrahepatic portosystemic shunt (TIPS).Materials and methodsFour databases were used to identify clinical trials published from inception until March 2020. Data were extracted to estimate and compare one-year and three-year overall survivals, hepatic encephalopathy, variceal rebleeding, and shunt dysfunction rates between patients with 8 mm covered stents and those with 10 mm covered stents.ResultsFive eligible studies were selected, which included 489 patients (316 men, 173 women). The 8 mm covered stent group had higher efficacy regarding one-year or three-year overall survival (odds ratio [OR], 2.88; P = 0.003) and (OR, 1.81; P = 0.04) and lower hepatic encephalopathy (OR, 0.69; P = 0.04) compared with 10 mm covered stent group. There were no significant differences in variceal rebleeding rate (OR 0.80; P = 0.67). However, shunt dysfunction was lower in 10 mm covered stent group (OR, 2.26; P = 0.003).ConclusionsOur results suggest that the use of 8 mm covered stents should be preferred to that of 10 mm covered stents for TIPS placement when portal pressure is frequently monitored.     

甲状腺疾病患者血清 Tg-CIC 中 Tg-Ab 水平检测及相关临床研究

目的　对血清甲状腺球蛋白免疫复合物 (thyroglobulin circulating immune complex, Tg-CIC) 中抗甲状腺球蛋白抗体 (anti-thyroglobulin antibody, Tg-Ab) 含量检测，探讨 Tg-CIC 在甲状腺疾病中的临床以及流行病学意义。方法　收集甲状腺疾病患者血清标本 187 例，每例血清标本分为两组 ( 实验组和空白对照组 )，采用免疫复合物解离专利技术对甲状腺疾病患者血清标本 Tg-CIC 进行分离、解离，通过检测 Tg-CIC 解离后的 Tg-Ab 含量来间接反映甲状腺疾病患者血清中Tg-CIC 水平，按照不同的甲状腺疾病进行分组并对实验结果分析讨论。结果　不同甲状腺患者血清中 Tg-CIC 总阳性率达 92.51%，不同甲状腺疾病血清中 Tg-CIC 的阳性率差异无统计学意义 (χ?=2.917, P>0.05)。不同甲状腺疾病患者间血清游离 Tg-Ab 含量差异无统计学意义 (H=3.882, P>0.05)，不同甲状腺疾病患者间血清 CIC 中 Tg-Ab 含量差异无统计学意义(H=5.5842, P>0.05)。不同甲状腺疾病患者中，甲状腺功能亢进、甲状腺炎以及甲状腺结节患者血清游离 Tg-Ab 的含量与血清 CIC 中的 Tg-Ab 含量呈正相关 (P<0.05)，甲状腺功能减退、甲状腺肿瘤患者血清游离 Tg-Ab 的含量与血清 CIC 中的Tg-Ab 含量不相关 (P>0.05)。结论　在甲状腺疾病患者血清中，大部分可检出 Tg-CIC，与疾病类型无关。而甲状腺疾病患者中，甲状腺功能亢进、甲状腺炎以及甲状腺结节患者血清游离 Tg-Ab 含量与血清 CIC 中 Tg-Ab 含量存在相关性，为我们进一步了解 Tg-CIC 与甲状腺疾病的发生、发展的相关性研究奠定了基础，提供了新的研究视角。     

儿科诊断性X线扫描家属知情与接受现状调查

目的:了解建德市基层医院儿科门诊进行X线扫描治疗中,家属对X射线检查的知情同意与接受现状。方法:随机抽取建德市属3家公立综合性医院共60位接受X线扫描的儿童患者家属为调查对象,发放自制调查问卷并统计分析。结果:55位(91.67%)患者表示治疗前主治医生只告知了X射线是诊断性检查,没有具体告知X射线的危害性;18位(30%)的患者家属不清楚辐射会对人体有损害,42位(70%)不清楚或不注意辐射警示标志,更不会主动要求防护措施,学历水平较高者及有从事医务工作背景者接受X射线检查的为12人(20%),明显低于学历水平低者或没有从事医务工作背景者的46人(76.67%),不知可否接受的有2人(3.33%)(P<0.001)。结论:基层医院儿科诊断性X射线扫描前的知情同意告知仍需加强,儿科放射检查偏多,应避免并加强宣传和教育。     

痛风的遗传基础

痛风是一种常见的由尿酸盐沉积引起的慢性炎症性关节炎。该文总结了最新的痛风遗传学基础,发现痛风的高风险基因多数与肾脏和肠道尿酸盐转运系统相关。糖酵解基因是一种异于肾和肠道尿酸排泄的血清尿酸调控路径,也为痛风和其他相关的代谢性疾病提供了新的病因学线索。基因之间的相互作用、基因与环境危险因素之间的相互作用均与痛风的发病风险相关。     

漏斗胸Nuss矫形术对胸廓的影响及相关因素分析

目的通过CT影像测量了解漏斗胸Nuss矫形术前后胸廓径线的改变情况,探讨并分析Nuss矫形术对胸廓的影响及相关因素。方法对2014年1月至2018年12月郑州大学第一附属医院收治的50例行漏斗胸Nuss矫形术患儿的临床资料进行回顾性分析。50例患儿中男43例,女7例。所有患儿中存在脊柱侧弯6例,胸廓不对称12例,胸骨旋转11例。通过CT影像测量其放置矫形器前及取出矫形器后胸廓各椎体平面最大横内径及该平面胸脊间的距离,通过配对样本t检验比较矫形前后各径线的改变情况,以及通过独立样本t检验分析在不同年龄、性别、矫形时间、漏斗胸对称与否、是否合并脊柱侧弯等情况间的差异性。结果50例患儿均顺利完成矫形器置入术及矫形器拔除术,无明显术中及术后并发症,Nuss矫形后较矫形前相比,胸廓前后径在第8~12胸椎水平均较前增加,第3~5胸椎平面较前减小,胸廓横径在第8~10胸椎平面较前减小;年龄≤10岁、矫形时长≥2年及女性患儿胸廓前后径改变量在多个胸椎平面分别较年龄>10岁、矫形时长<2年及男性患儿大,P<0.05,差异具有统计学意义。结论漏斗胸Nuss矫形后前胸壁凹陷较前明显改善,并且在不同年龄和不同矫形时长间存在差异性,年龄较小及适当增加矫形时间可获得较好的矫形效果,而胸廓横径生长在一定程度上受限。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.